H-OBD-1T OIL HEAT TEST KIT

The Hampden Model H-OBD-1T Oil Burner Test Kit contains the equipment necessary to make tests and perform experiments with all H-OBD and H-OBT Oil Burner Demonstrators.

DATA FILE

hvac

Heating

DATA FILE

DATA FILE

H-GT-1 GAS CONTROL DEMONSTRATION TRAINER

The Hampden Model H-GT-1 Gas Control Demonstration Trainer provides students with experience in operating and testing the gas controls, electrical circuits, and gas burner operation of a pilot flame-type gas ignition system. It contains all the components of a pilot flame type gas burner system, completely assembled, prewired and tested.

BACK TO HVAC

H-EIG-1C ELECTRONIC IGNITION GAS TRAINER

The Hampden Model H-EIG-1C Electric Ignition Gas Trainer provides students with the opportunity to operate, test, and troubleshoot the gas controls, electrical circuits, and electronics components of an electronically-controlled direct spark ignition system. It contains all the components of a direct spark ignition gas burner system, completely assembled, prewired, and tested.
Options:
Model HMC-3 Mobile Cart

H-OBD-2 MOBILE OIL BURNER DEMONSTRATOR

The Hampden Model H-OBD-2 Mobile Oil Burner Demonstrator duplicates typical field installations from oil tank to combustion chamber, flame and draft adjustment to indicate variable firing efficiency and observation of flame and nozzle patterns.

HAMPDEN ENGINEERING CORPORATION

sales@hampden.com

P.O. Box 563

East Longmeadow, MA 01028

(Toll Free) 800-253-2133 or 888-HEC-CORP

Local: 413-525-3981

Fax: 413-525-4741

DATA FILE

H-GHT-4A GAS FIRED WARM AIR HEATING TRAINER

The Hampden Model H-GHT-4A Gas Fired Warm Air Heating Trainer provides hands-on training by allowing students to conduct tests and adjustments on a modern forced air gas modulating furnace. Trainer contains 17 faults.

DATA FILE

H-GHT-2C GAS HEAT TRAINER

The Hampden Model H-GHT-2C Gas Heat Trainer contains the actual control components of a commercial gas heat installation. No gas is required. Although operation of the blower motor, along with the pilot and main burner are simulated, the spark igniter is real and fully functional. Up to 15 faults may be inserted from rear panel.

H-GT-2 GAS TRAINER WITH VENT DAMPER & RETROFIT IGNITION

The Hampden Model H-GT-2 Gas Trainer with Vent Damper and Retrofit Ignition provides students with experience in operating and testing a retrofit spark-ignited pilot gas system with automatic operation of a vent damper to retain heat when burner is off. It contains all the actual control components of an energy efficient spark-ignited, pilot fired furnace control system having automatic vent damper control. The trainer is supplied assembled, prewired, and tested. It contains an automatic vent damper, a thermostat, a temperature sensor, a control transformer, main valve, electronic spark ignition control, retrofit pilot igniter and flame sensor, and fan/limit control.

H-HPT-2A ADVANCED HEAT PUMP CONTROL TRAINER

The Hampden Model H-HPT-2A Advanced Heat Pump Control Trainer is designed to facilitate instruction in the understanding and troubleshooting of the electrical controls of a heat pump system. It makes use of actual live components wired into an operating electrical controls system. The compressor and heaters are simulated by means of indicator lights.

DATA FILE

H-HPT-3 HEAT PUMP TRAINER

The Hampden Model H-HPT-3 Heat Pump Trainer simulates the split system heat pump. Split system heat pump units are designed for use with a wide variety of fossil fuel furnaces, electric furnaces, air handlers, and evaporator coil combinations.

H-EHST-1B ELECTRIC HEAT SERVICE TRAINER

The Hampden Model H-EHST-1B facilitates the study and troubleshooting of the electrical and control circuits of an electric heat furnace. Standard commercial components are wired into an operating electrical control system, while the heaters and blower are simulated by pilot lights and resistors. Up to 34 malfunctions may be inserted via the fault switches mounted on the rear of the trainer.

H-HPT-1D HEAT PUMP CONTROL TRAINER

The Hampden Model H-HPT-1D Heat Pump Control Trainer provides students with the opportunity to operate, test, and troubleshoot the electrical controls found in large heat pump installations.

DATA FILE

H-HP-3 HEAT PUMP DEMONSTRATOR (R-134A)

The Hampden Model H-HP-3 Heat Pump Demonstrator provides students with the ability to observe and operate a full-size combination air conditioning/heat pump unit. It is a combination system that uses the refrigeration cycle to either extract heat from, or deliver heat to, a comfort conditioned area.

H-OBD-1 OIL BURNER DEMONSTRATOR

The Hampden Model H-OBD-1 contains all of the mechanical and electrical components necessary to operate an actual oil burner of the type used in oil-fired furnaces and hot water heaters.

H-GHT-1T GAS HEAT TEST KIT

The Hampden Model H-GHT-1T Gas Heat Trainer Test Kit contains the equipment necessary to make tests and perform experiments with Hampden's line of H-GHT Series Gas Heat Trainers. The H-GHT-1T consist of a Gas Testing Kit and a Hampden H-444-1 Digital Multimeter. (shown is the H-GHT-1B Gas Heat Trainer)

DATA FILE

H-GHT-3 GAS BURNER DEMONSTRATOR

The Hampden Model H-GHT-3 Mobile Gas Burner Demonstrator provides hands-on experience for students to conduct tests and adjustments on modern forced air gas furnaces.

H-EHF-2A ELECTRIC HEAT FURNACE DEMONSTRATOR

The Hampden Model H-EHF-2A Electric Heat Furnace Demonstrator provides students with experience in connecting and operating an electric heat furnace of the type found in residential dwellings and commercial establishments. It contains all the standard control components used with an electric heat furnace.
Options:
Model HMC-3 Mobile Cart

H-GHT-1B GAS HEATER TRAINER

The Hampden Model H-GHT-1B Gas Heat Trainer provides practical experience in the operation, testing, and troubleshooting of gas-fired furnaces, and furnace control system.

H-EHF-1A ELECTRIC HEAT FURNACE CONTROL

The Hampden Model H-EHF-1A Electric Heat Furnace Control contains the actual components used in the control of commercial and residential electric furnaces. With it the student gains experience in designing, wiring, checking out, and troubleshooting electric furnace control systems.

H-OBD-5B DOMESTIC OIL FURNACE DEMONSTRATOR

The Hampden Model H-OBD-5B Domestic Oil Furnace Demonstrator consists of a standard domestic oil fired furnace modified for educational purposes. The control panel has electrical controls that include: flame detector, fan control, thermostat, and control transformer. Also included is a plenum cabinet with registers.
Options:
H-OBD-5PH Power Humidifier Option
H-OBD-5C Air Conditioning Option