BPS-24-2 DC POWER SUPPLY 2A

The Hampden Model BPS-24-2 DC Power Supply 2A is required for the H-FP/EHS Electro-Hydraulics System and the H-FP/EPS Electro-Pneumatics System.

hydraulic and pneumatic

IMAGE NOT AVAILABLE

DATA FILE

PNEUMATICS

HYDRAULICS

DATA FILE

FLUID POWER LEARNING CENTER

H-FP/AH ADVANCED HYDRAULICS

The Advanced Hydraulics segment gives students the opportunity of designing, connecting, and operating more complex circuits, such as sequencing, counterbalance, unloading and braking. The additional components of this segment are used in conjunction with the Basic Hydraulics segment of the Fluid Power Learning System. NOTE: Bench is shown with H-FP/BH, H-FP/EH amd H-FP/BP.

H-FP/H-6032 BENCH AND ASSEMBLY HARDWARE

The Hampden Fluid Power Learning System is a completely self-contained mobile training system designed to demonstrate the principles and practices of hydraulic & pneumatic power transfer. Study segments offered include; Basic Hydraulics, Advanced Hydraulics, Electro-Hydraulics, Basic Pneumatics, Fluidics. and Electro-Hydraulics All segments are designed around the H-FP/6032 Bench which includes an experimental hardware package. Optional Air compressor may be included with pneumatic programs of study. NOTE: Bench is shown with H-FP/BH, H-FP/EH amd H-FP/BP.

H-FP-223-14 HYDRAULIC TRAINER

The Hampden Model H-FP-223-14 Hydraulic Trainer consists of a mobile bench, hydraulic pump, and selection of hardware mounted on a vertical panel. All hydraulics hardware is of commercial quality and configured for training purposes. The vertical panel is constructed of code gauge steel finished in instrument white baked enamel.
Options:
H-FP-223-14-FP Hydraulic Fault System Option
H-FP-223-14-EH Electrohydraulics Option
H-FP-223-14-P Pneumatics Option
H-FP-223-14-A Accumulator Option
H-FP-223-14-JS Joystick Option
H-FP-223-14-PPS Pneumatic Air Supply Option
H-FP-223-14-PLC Programmable Logic Controller
H-FP-223-14/15-CD Simulator Software Option for Hydraulics and Pneumatics

HAMPDEN ENGINEERING CORPORATION

sales@hampden.com

P.O. Box 563

East Longmeadow, MA 01028

(Toll Free) 800-253-2133 or 888-HEC-CORP

Local: 413-525-3981

Fax: 413-525-4741

DATA FILE

IMAGE NOT AVAILABLE

H-FP/ H-6032 BENCH AND ASSEMBLY HARDWARE

DATA FILE

PNEUMATICS

H-FP/PAC PORTABLE AIR COMPRESSOR

The Hampden Model H-FP/PAC Portable Air Compressor with 8 ft. hose.

DATA FILE

HYDRAULICS

H-FP/FL FLUIDICS

This segment provides students with a comprehensive exploration of nonmoving part air logic. In fluidics, air serves as both the power medium and the control medium. The Fluidics segment utilizes the Control Panel used in the Basic Pneumatics segment. Furnished complete with pneumatic tubing having quick-disconnect fittings. NOTE: Bench is shown with H-FP/BH, H-FP/EH amd H-FP/BP.

DATA FILE

H-FP/EH ELECTROHYDRAULICS

Students learn the basic concepts of electricity and how pilot devices, relays, and solenoids are used to control the operation of hydraulics systems. When the Electrohydraulic segment is included, the Fluid Power Learning Center contains an electromagnetic control panel. For a more advanced study of automation, the Model H-FP/ES Servo Trainer, or the Model H-FP/PLC, Programmable Logic Controller, may be added. Also available is the Model H-FP/EES, interface panel, for analog PLC Control of the servo system. NOTE: Bench is shown with H-FP/BH, H-FP/EH amd H-FP/BP.

H-FP/BP BASIC PNEUMATICS

The law governing the behavior of the air are covered in this segment, along with the components of pneumatic power transmission systems. When Basic Pneumatics is included, the Fluid Power Learning Center contains the pneumatic control panel complete with pneumatic hoses having quick-disconnect couplings. An air compressor may be added, if required. NOTE: Bench is shown with H-FP/BH, H-FP/EH amd H-FP/BP.

H-FP/ES ELECTROHYDRAULIC SERVO TRAINER

The Hampden Model H-FP/ES Electrohydraulic Servo Trainer provides a comprehensive study of electronic analog control of hydraulic systems. Subjects include: angular and linear position transducers, rotary and linear hydraulic actuators, summing and signal amplifiers, current limiting, dither control, servo valves and drivers, and automatic control theory.

DATA FILE

H-FP/ESS ELECTRONIC SENSOR SYSTEM

The Hampden Model H-FP/ESS Electronic Sensor System consists of a Magnetic Reed Sensor, Proximity Sensor, Hall Effect Sensor, Fiber Optic Sensor, Target Set and a Base Assembly with protractor. All of the above modules are designed for interface with the H-FP/EHS Electro-hydraulics and H-FP/EPS Electro-Pneumatics Systems.

DATA FILE

H-FP/ PPS PNEUMATICS AIR SUPPLY

The Hampden Model H-FP/PPS Pneumatics Air Supply is designed for mounting within the H-FP/H-6032 bench, completely factory assembled.

H-FP/EPS ELECTRO-PNEUMATICS SYSTEM

The Hampden Model H-FP/EPS Electro-Pneumatics System consists of an Electro-Pneumatic Module. NOTE: The BPS-24-2 DC Power Supply 2A is required for this unit.

DATA FILE

H-FP/IPS INTERMEDIATE PNEUMATICS SYSTEM

The Hampden Model H-FP/IPS Intermediate Pneumatics System consists of a Pneumatic Module.

DATA FILE

H-FP/MTS BASIC MECHANISMS SYSTEM

The Hampden Model H-FP/MTS Basic Mechanisms System consists of a steel work base, carrying case for the mechanical components including gears, belts, pulleys and bearings.

DATA FILE

H-FP/PLC PROGRAMMABLE LOGIC CONTROLLER

The Programmable Logic Controller Segment allows for a more advanced study of automation.

DATA FILE

H-FP-223-15 PNEUMATIC TRAINER

The Hampden Model H-FP223-15 Pneumatic Trainer consists of a mobile bench, storage drawer, and a selection of commercial quality hardware, mounted on a 11 gauge white steel vertical panel, mounted on a frame of 14 gauge steel. Finished in instrument tan texture enamel. The mobile bench is constructed of code gauge steel finished in instrument tan texture enamel with four swivel casters, two with locks. The bench includes a locked storage drawer. The bench top is of a pan construction with replaceable non woven absorbent mat. A storage shelf and provisions are provided for mounting the optional compressor.
Options:
H-FP-223-15-FP Pneumatic Fault System Option
H-FP-223-15-PPS Pneumatic Air Supply Option
H-FP-223-15-EPS Electro-Pneumatics Module Option
H-FP-223-15-PLC Programmable Logic Controller
H-FP-223-14/15 CD Simulator Software for Hydraulics and Pneumatic Option

MODULAR FLUID POWER

DATA FILE

H-FP/PPS PNEUMATICS AIR SUPPLY

The Hampden Model H-FP/PPS Pneumatics Air Supply is designed for mounting within the H-FP/H-6032 bench, completely factory assembled.

MODULAR FLUID POWER

DATA FILE

FLUID POWER LEARNING CENTER

H-FP/HPS-LITE

The Hampden Model H-FP/HPS-LITE Mobile Hydraulic Workstation supports one H-FP/BHS Hydraulic System.

DATA FILE

H-FP/BHS BASIC HYDRAULICS SYSTEM

The Hampden Model H-FP/BHS Basic Hydraulics System consists of an Instrumentation Module, a Valve Module and an Actuator Module (all shown).

H-FP/BPS BASIC PNEUMATICS SYSTEM

The Hampden Model H-FP/BPS Basic Pneumatics System consists of an Instrumentation Module, a Pneumatic Actuator / Valve Module and a Hose and Component Package.

H-FP/IHS INTERMEDIATE HYDRAULICS SYSTEM

The Hampden Model H-FP/IHS Intermediate Hydraulics System consists of a Valve Module.

H-FP/BH BASIC HYDRAULICS

In this segment, students learn the basic principles of hydraulic circuits. Components include valves (flow, check, relief, two-way, four-way, etc), cylinders, motors, and pumps. Furnished complete with hydraulic hoses having quick-disconnect couplings. NOTE: Bench is shown with H-FP/BH, H-FP/EH amd H-FP/BP.

H-FP/HPS MOBILE HYDRAULIC SUPPLY

The Hampden Model H-FP/HPS Mobile Hydraulic Supply supports up to 3 three hydraulic systems.

H-FP/EHS ELECTRO-HYDRAULICS SYSTEM

The Hampden Model H-FP/EHS Electro-Hydraulics System consists of a Control Module and a Component Module. This system is to be used in conjunction with the H-FP/BHS. NOTE: The BPS-24-2 DC Power Supply 2A is required for this unit.